Prescribed List Tracker

100mm, universal, inline, outboard, phantom and spherical

Articulating hinges, universal, inline, joint, ankle, knee

One size only

Tornado Hinge pack of 2

Diameter - 1.6 to 6mm; Lengths - 40 to 550mm

Frame pins and screws

One Size, 2-30mm, slotted, conical and M6

Nuts, Spacers, Washers and Bolts.

70mm to 200mm.

Telescopic liner distractors, telescope hinge distractors and angular distractors

500cc and greater

Gel filled silicone Motiva breast implant

Less than 500cc

Gel filled silicone Motiva breast implant

1ml PHIL liquid embolic, 1 sterile pre-filled syringe of DMSO and 1 Universal Adaptor

Precipitating Hydrophobic injectable liquid

Diameter 9mm - 13mm. Length 200 - 245mm.

Fitbone IM Lengthening Nail and Receiver.

One size only

Anodised aluminium and stainless steel

One size only

Anodised aluminium and stainless steel

One size only

Anodised aluminium and stainless steel

One size only

Anodised aluminium and stainless steel

One size only

Anodised aluminium and stainless steel

One size only

Complete System Sterile

Shaft Dia 3.0 - 6.0mm Thread Dia 6.0 - 2.00mm Total Length 40 - 260mm Thread Length 15 - 100mm

Frame Component - Pins

Shaft Dia 3.0 - 6.0mm, Thread Dia 6.0 - 2.0mm, Total Length 40 - 260mm, Thread Length 15 - 90mm

HA coated screw used for fixation of an external frame

One size

Metadiaphyseal Fixator

One size only

Articulated Ankle Fixator

One size only

Hybrid Fixator

Adult and paediatric - Short, Standard and Long

Orthofix Limb Reconstruction System

Short, Standard, Long and Articulated Horizontal and Vertical Axis

MiniRail System

Short, Standard, Long

Pennig Minifixator

12mm, 16mm

Guided growth plate for correction of angular deformities over an open growth plate. Titanium, two screw holes, wire guided.

12mm 16mm 20mm

The guided growth plate system plus consists of different sizes of eight-Plate plus. The device is designed for the gradual correction of paediatric congenital as well as acquired deformities in both upper and lower extremities.

16mm plate 22mm plate

The Guided Growth Plate System Plus consists of different sizes of quad- Plate plus, different cannulated and solid screw options. The device is designed for the gradual correction of paediatric congenital as well as acquired deformities in both the upper and lower extremities, provided that the physics are not fused. The plates feature a contoured waist and low profile for paediatric usage. There is a centre hole in the plates for a temporary guide pin to be implanted to aid application and removal of the plate. The plates are attached to the external surface of the bone over the growth plate by screws. These screws are not locked to the plate, but rather are allowed to swivel and diverge in their position as bone growth occurs. The implant acts like a flexible hinge, permitting growth at the growth plate to gradually straighten the limb.

100mm - 300mm partial rings

The Orthofix circular frame is a surgeon designed, user-friendly ring fixation system for trauma applications, limb lengthening and deformity correction. It is based on the science, methodology and principles of Prof Ilizarov. The circular frame is simple offering pre-assembled functional components that are easy to connect and operate. The frame is stable with anti-rotational feature on connection elements that prevents any undesirable movement. It's unique wire and half pin fixation elements provide efficient bone segment stabilisation. A biomechanically superior metal-plastic interface is stable both during and between adjustments. The system is versatile, consisting of rings, half-rings, foot plates, 5/8 rings and arches. Full control of bone segments accomplished with orthodox circular frame allows precise movement of segments without compromising stability.

80mm - 300mm full rings

The Orthofix circular frame is a surgeon designed, user friendly ring fixation system for trauma applications, limb lengthening and deformity correction. It is based on the science, methodology and principles of Prof Ilizarov. The circular frame is simple, offering preassembled functional components that are easy to connect and operate. The frame is stable with anti-rotational feature on connection elements that prevents any undesirable movement. Its unique wire and half pin fixation elements provide efficient bone segment stabilisation. A biomechanically superior metal-plastic interface is stable both during and between adjustments. The system is versatile, consisting of rings, half-rings, foot plates, 5/8 rings and arches. Full control of bone segments accomplished with Orthofix circular frame allows precise movement of segments without compromising stability.

100mm - 220mm foot plates

The Orthofix circular frame is a surgeon designed, user-friendly ring fixation system for trauma applications, limb lengthening and deformity correction. It is based on the science, methodology and principles of Prof Ilizarov. The circular frame is simple, offering preassembled functional components that are easy to connect and operate. The frame is stable with anti-rotational feature on connection elements that prevents any undesirable movement. Its unique wire and half pin fixation elements provide efficient bone segment stabilisation. A biomechanically superior metal-plastic interface is stable both during and between adjustments. The system is versatile, consisting of rings, half-rings, foot plates, 5/8 rings and arches. Full control of bone segments accomplished with Orthofix circular frame allows precise movement of segments without compromising stability.

Short 70 - 104mm range Medium 98 - 188mm range Long 163 - 300mm range

The rapid adjust strut is made of two metal casings encapsulating a threaded rod. It has the ability to correct acutely or gradually. The rapid adjust strut ends have 45 degree locking angulation with 360 degree rotation. The rapid adjust struts have unique ball and claw universal lockable joint at both ends of the strut. Two rapid adjust struts are sufficient for fracture reduction and initial stabilisation, whereas three rapid adjust struts are necessary for walking and weight bearing. Loosening of the ball claw joints allows for verification of the amplitude of angular correction and horizontal translation, magnitude of rotational correction and stability of fixation in coronal, sagittal and horizontal planes.

Struts are available in four sizes - ultrashort, short, medium and long providing adjustment range from 45mm to 318mm. Ultrashort strut 45 - 101mm range Short strut 92 - 122mm range Medium strut 114 - 184mm range Long strut 158 - 318mm range

Struts consist of two telescopic aluminium tubes, outer tube and an inner tube, which can be locked together at various lengths using the side locking bolt and clamp washer. The inner tube is attached to a spring-loaded, black knurled adjustment knob. The adjustment knob mates with the threaded rod in a manner such that the rod translates relative to the inner tube when the knob is rotated. This will provide gradual changes of overall strut length in 0.5mm increments. A reference arrow with plus sign located on the base of the adjustment knob indicates the direction of turning to perform strut elongation - distraction. Each strut has two special joints and one at the base of the outer tube and the other at the end of the threaded rod. Each joint has a mounting stud, which can be inserted into the mounting holes on the ring tabs and held in place by the locking screw. The rapid adjustment of the strut length is achieved by untightening the side locking bolt, sliding the inner tube relative to the outer tube to the desired length. The rapid adjustment is indicated by the inner tube scale in 1mm increments relative to the orange line mark on the outer tube. The gradual adjustment is achieved by pulling and rotating the adjustment knob resulting in a noticeable detect click every 0.5mm of adjustment. Gradual adjustment is indicated by the scale relative to the green line mark.

4.5mm x 16mm 4.5mm x 24mm 4.5mm x 32mm 4.5mm x 36mm

The guided growth plate system plus consists of different sizes of plates and cannulated screws. The device is designed for the gradual correction of paediatric congenital as well as acquired deformities in both upper and lower extremities.

5.4mm diameter implants: Lengths - 50mm, 55mm, 60mm, 65mm, 70mm, 75mm, 80mm, 85mm, 90mm, 95mm, 100mm, 105mm, 110mm, 115mm, 120mm, 125mm, 130mm, 135mm, 140mm, 145mm, 150mm, 155mm, 160mm, 165mm, 170mm. 7.4mm diameter implants: Lengths - 50mm, 55mm, 60mm, 65mm, 70mm, 75mm, 80mm, 85mm, 90mm, 95mm, 100mm, 105mm, 110mm, 115mm, 120mm, 125mm, 130mm, 135mm, 140mm, 145mm, 150mm, 155mm, 160mm, 165mm, 170mm, 175mm, 180mm, 185mm, 190mm, 195mm, 200mm.

The Fusion Beaming System has been designed to address the specific demands of advanced deformity and trauma reconstructions of foot and ankle applications. The system was developed for the treatment of neuropathic deformities, such as Charcot, requiring fusion of the medial and/or lateral columns, with or without corrective osteotomies as well as for joint fusions within the mid and hindfoot. The Fusion Beaming System consists of two different diameter implant ranges, designed for optimal implant selection for wide ranging patient anatomies, and an instrumentation including the dedicated Sterilization Tray. The Fusion Beaming System is designed with an instrumentation and technique that have been developed to simplify the surgery.

Standard.

Universal and inline hinges.

60mm - 400mm.

Threaded rods.

Length 12 - 30mm, 10mm Hex Heads, Thickness 2 - 4mm.

Nuts, Spacers, Washers and Bolts.

70mm to 200mm.

Linear Distractor.

100mm to 400mm.

Rails and Compression Distraction Unit.

Small.

Monoplanar clamp - 3 dimensional.

One size.

Knee spanning and limb salvage external fixator - fully assembled.

One size.

The Kits contain the Calcaneal Fixator, T-Wrench, Driver, Screws and Kirschner wire.

0mm, 5mm, 10mm.

AHN end cap.

Standard.

Coupling devices.

4mm to 8mm.

Wire, Pin Fixators.

10, 11, 12mm diameter. 150 - 300mm length.

Hindfoot Fusion Nailing System, titanium.

20 - 120mm length. 5mm diameter.

Compression screw.

Diameter 4.0 - 4.5mm. Length 20 - 80mm. Short - Long Thread

Fitbone Partially Threaded IM nail Locking Screw

10.0mm, 11.5mm, 13.5mm in lengths 30mm-90mm in 5mm increments

Threaded fenestrated 3D printed sacroiliac fusion implant

Adjustable valve with siphonX

Externally adjustable valve with antisyphon device

7, 9, 10, 11 & 12 hole

PEEK curved and round plate